Serrated retaining anchor FB-Z with adjustment

MOSO-FB-Z serrated retaining anchors for fastening precast concrete components:
The safe and convenient adjustable retaining anchor with milled teeth.

Your advantages at a glance:

The MOSO serrated retaining anchor is available as standard, as well as in customised sizes and versions
With our high-speed milling cutter, we have the technology to produce extremely precise
and geometrically accurate toothing for an optimum frictional connection. Stamped toothings are often a problem!
We can manufacture the fastening ends of the serrated retaining anchors in a variety of ways: with hammer head or T-head or with a connecting hole for insertion of an anchor

Product information

Hole size options
Slot size
Toothing Component sizes

11, 13, 17 and 21 mm
up to 70 mm in length
small components directly
serrated cut,
large components with
welded-on
rack plate

Serrated retaining anchor FB-Z with adjustment

Use and application

As retaining anchors on elements for precast concrete components against tipping
As load-bearing connection for smaller precast concrete components
For the adjustment of wall clearance or the exact height measurement
Their use in conjunction with MBA anchor rails on both sides enables three-dimensional adjustment

Different types enable fastenings in virtually all building situations.
Different fastening lengths, load cross-sections (3.5 – 7.0 kN) or versions with hammer head/T-head or for anchor fastening,
can be produced at short notice so that you will quickly have the right serrated retaining anchor for any application.

Serrated retaining anchor FB-Z with adjustment

Show tables

MOSO serrated retaining anchor in stainless steel (1.4404, 1.4571, 1.4362)
Type	Dimensions	Type	Dimensions
Flat steel (part 1):		Mandrel (part 1.1):
FB-ZK-100-3.5	30/5...165 mm	MANDREL1416 d =	14/164 mm (FB-ZA)
FB-ZK-150-3.5	30/5...215 mm	MANDREL1416 d =	14/164 mm (FB-ZA)
FB-ZK-200-3.5	30/5...265 mm	MANDREL1416 d =	14/164 mm (FB-ZA)
FB-ZK-250-3.5	30/5...315 mm	MANDREL1416 d =	14/164 mm (FB-ZA)
FB-ZK-300-3.5	30/5...365 mm	toothed washer (part 2): Rdl. 11 mm /30/30 mm Rdl. 11 mm /30/30 mm We are also happy to supply matching anchors hammer-head bolts.

FB-ZK-100-7.0	30/5...165 mm
FB-ZK-150-7.0	30/5...215 mm
FB-ZK-200-7.0	30/5...265 mm
FB-ZK-250-7.0	30/5...315 mm
FB-ZK-300-7.0	30/5...365 mm

FB-ZA-100-3.5	30/5...165 mm
FB-ZA-150-3.5	30/5...215 mm
FB-ZA-200-3.5	30/5...265 mm
FB-ZA-250-3.5	30/5...315 mm
FB-ZA-300-3.5	30/5...365 mm

FB-ZA-100-7.0	30/5...165 mm
FB-ZA-100-7.0	30/5...215 mm
FB-ZA-100-7.0	30/5...265 mm
FB-ZA-100-7.0	30/5...315 mm
FB-ZA-100-7.0	30/5...365 mm

Errata and technical changes reserved.

Serrated retaining anchor FB-Z with adjustment

Technical drawings

: Serrated retaining anchors with connection to anchor rail.

: Serrated retaining anchors with movable cross pin.

: Type FB-ZK

: Type FB-ZL

: Type FB-ZW

: Type FB-ZH

Keywords / Related terms: MOSO serrated retaining anchors, serrated retaining anchor, toothed slot, frictional adjustment, slot adjustment, toothed adjustment, toothed counterplate, toothed anchor, retaining anchor, retaining anchor for prefabricated parts, retaining anchor for precast concrete