Befestigungstechnik

Eggeweg 2a
32139 Spenge

Telefon: 05225 / 8799 - 0

Ingrid Bartling

Direct contact »

Vertrieb Abt. MFixings - Projektleiterin Fassadenbefestigungen/Kalkulation

Telefon:05225 / 8799 - 320

Fax:05225 / 6710

E-Mail:bartling(at)modersohn.de

Volker Schwab

Direct contact »

Vertrieb Abt. MFixings - Projektleiter Fassadenbefestigungen/Kalkulation

Telefon:05225 / 8799 - 430

Fax:05225 / 6710

E-Mail:schwab(at)modersohn.de

Home > Masonry fastenings > Masonry façade fastenings > Angled supports > WA-D/WA-M: For a continuous soffit

zum MOSO-Haus

back

Recommend page Print page

Text for invitation to tender

For a continuous soffit

Angled supports WA-D/WA-M

: Wall supported with MOSO angled support type WA-D.

The MOSO angled support type WA-M permits direct installation at the anchorage base.

The MOSO angled support type WA-D with welded-in struts is used to bridge large distances from the wall.

Both types are used when the support remains visible and a continuous soffit is required.

Your advantages at a glance:

Solid angle structure that seals off the air gap downwards if required
The large projecting angle completely covers the brick underside and the air gap from view
The long slots above the junction plates make it easy to install and align
We also supply the matching, approved air gap wire anchors at low cost

Angled supports WA-D/WA-M

Product information

Load stages:
Distance from the wall:
Material:
Evidence:

1,2kN - 3,2kN
10 - 200 mm

approved stainless steel
structural analysis

Angled supports WA-D/WA-M

Use and application WA-D

For visible support of walls.
Can only be used in corners to a limited extent.
The brackets must be fully supported until the brick mortar has set hard.

Angled supports WA-D/WA-M

View tables

Technische Daten WA-D
Type / Version	Load stage	1,5 kN/attachment point		3,2 kN/attachment point
Type / Version	Distance/wall	Cantilever length K	Bracket height x	Cantilever length K	Bracket height x
	20 - 40	130	104	130	102
	40 - 60	150	124	150	122
	60 - 80	170	144	170	142
	80 - 100	190	174	190	172
	100 - 120	210	194	210	192
	120 - 140	230	224	230	222
	140 - 160	250	244	250	242
	160 - 180	270	264	270	262
	180 - 200	290	284	290	282
	Bigger wall distance on request
Material thickness	s	4		6
Length of element		up to 4000		up to 4000
Max. size of fastener		up to M12		up to M12
Shear connector for cracked concrete > C20/25 (tension/compression zone)		Fischer FAZ II M10/10 Distance from edge ar > 60		Fischer FAZ II M12/30 Distance from edge ar > 120
Values apply for facing bricks 115 mm thick with a superimposed load < 2 storeys, otherwise the anchors must be adapted in accordance with DIN 1053 Other dimensions on request

Technische Daten WA-M
Type / Version	Load stage	1,2 kN/attachment point		2,1 kN/attachment point		3,2 kN/attachment point
Type / Version	Distance/wall	Cantilever length K	Bracket height x	Cantilever length K	Bracket height x	Cantilever length K	Bracket height x
	10 - 20	100	74	100	72	100	70
	30 - 40	120	94	120	92	120	90
Material thickness	s	4		6		8
Length of element		up to 4000		up to 4000		up to 3000
Max. size of fastener		up to M12		up to M12		up to M12
Shear con. for uncracked concrete > C20/25 (tension/compression zone)		Fischer FAZ II M10/10 Distance from edge ar > 60		Fischer FAZ II M10x10 Distance from edge ar > 80		Fischer FAZ II M12/30 Distance from edge ar > 120
Values apply for facing bricks 115 mm thick with a superimposed load < 2 storeys, otherwise the anchors must be adapted in accordance with DIN 1053 Other dimensions on request

Standard dimensions, types WA-D and WA-M
Length of element	Number of attachments	Layout of angle-bracket anchors
500	2	125 /250/125
750	3	125/2x250/125
1000	4	125/3x250/125
1250	5	125/4x250/125
1500	6	125/5x250/125

Cross-references for additional information
Subject
Individual evidence of attachment in the anchorage base
Technical regulation governing masonry support (DIN 1053)
Principles for dimensioning masonry support

Errata and technical changes reserved.

Angled supports WA-D/WA-M

Technical drawings WA-D

: MOSO angled support type WA-D.

: Top view of MOSO angled support type WA-D.

Angled supports WA-D/WA-M

Use and application WA-M

For visible support of walls.
The brackets must be fully supported until the brick mortar has set hard.

Angled supports WA-D/WA-M

Technical drawings WA-M

: MOSO angled support type WA-M.

: Top view of MOSO angled support type WA-M.