Home  > Masonry fastenings > Masonry façade fastenings > Horizontal connectors > HV-L: Cavity-wall tie for retroactive attachment

Cavity-wall tie for retroactive attachment

Horizontal connectors HV-L

Anchorage with MOSO horizontal connector type HV-L.

The MOSO horizontal connector type HV-L is a cavity-wall tie for retroactively connecting double leaf masonry in accordance with DIN 1053.

It is not necessary to pull down the outer wall for rehabilition projects, as the old wall can be used for anchorage.

This anchor can also be used in difficult anchorage bases, provided that the loabearing capacity has been demonstrated by tensile testing.

Your advantages at a glance:

  • Ideal for use in façade refurbishments, as the wire anchor with its bent eyelet can be combined with suitable anchors for the specific setting base
  • Quick and easy installation
  • Particularly suitable for large wall clearances
  • Also available with thicker wire for greater compressive loads
Horizontal connectors HV-L

Product information

  • Diameter:
  • Distance from the wall:
  • Material:
  • Evidence:

4 mm
up to 430 mm

approved stainless steel
construction supervisory permit and test certificate

Horizontal connectors HV-L

Use and application

  • For rehabilitation projects in which the old facework is not to be demolished
  • Attachment with type SXS or FUR for concrete, natural stone and solid brick masonry.
  • Attachment with type FUR or ULR also for cored brick, cavity blocks and solid materials with low compressive strength.
Horizontal connectors HV-L

View tables

Technical data

Type / Version

Designation
Distance/wall
E ≤ 150 mm

Designation
Distance/wall
E 150 - 200 mm

Attachment
thickness (B)

Anchorage

HV-LV-10-235

HV-LV-10-275

up to

10 mm

 

 

 

 

 

 

full brick

HV-LV-30-235

HV-LV-30-275

up to

30 mm

HV-LV-50-235

HV-LV-50-275

up to

50 mm

HV-LV-70-235

HV-LV-70-275

up to

70 mm

HV-LV-90-235

HV-LV-90-275

up to

90 mm

HV-LV-110-235

HV-LV-110-275

up to

110 mm

HV-LV-130-235

HV-LV-130-275

up to

130 mm

HV-LV-150-235

HV-LV-150-275

up to

150 mm

HV-LV-180-235

HV-LV-180-275

up to

180 mm

HV-LV-210-235

HV-LV-210-275

up to

210 mm

HV-LL-10-235

HV-LL-10-275

up to

10 mm

 

perforated brick

HV-LL-30-235

HV-LL-30-275

up to

30 mm

HV-LL-45-235

HV-LL-45-275

up to

45 mm

HV-LL-65-235

HV-LL-65-275

up to

65 mm

HV-LL-90-235

HV-LL-90-275

up to

90 mm

HV-LL-115-235

HV-LL-115-275

up to

115 mm

HV-LL-130-235

HV-LL-130-275

up to

130 mm

HV-LL-160-235

HV-LL-160-275

up to

160 mm

HV-LL-230-235

HV-LL-230-275

up to

230 mm

Note information in permit notices!

Other dimensions on request

Accessories

Designation

Claw plate Ø 60 mm

Drip plate Ø 25 mm

Combifix Ø 60 mm

ISO-Clip Ø 60 mm

Cross-references for additional information

Subject

Attachment of facade dowels

Technical regulation governing masonry support (DIN 1053)

Errata and technical changes reserved.
Horizontal connectors HV-L

Technical drawings

MOSO horizontal connector type HV-L.
MOSO horizontal connector type HV-L.
Horizontal connectors HV-L

Installation

Drill and clean a hole.

Fit LSA-anchor and washer over the dowel sleeve from behind.

Screw in MOSO horizontal connector type HV-L.

Fit facade dowel (insulation holder / drip plates if required).