Scaffold anchors for masonry facades

Scaffold anchors GA-Q/GA-Z

: Anchorage with MOSO scaffold anchor type GA-Q.

Scaffold must be secured in accordance with DIN 4420.

The MOSO scaffold anchor type GA-Z only transmits tensile loads, while the type GA-Q anchor ensures that transverse forces are also reliably transmitted into the anchorage bas.

Scaffold anchors GA-Q/GA-Z

Product information

Load stages:
Distance from the wall:
Material:
Evidence:

3,3 - 8,0 kN
50 - 200 mm

approved stainless steel
structural analysis

Scaffold anchors GA-Q/GA-Z

Use and application

Type GA-Q for tensile and transverse forces, also for anchorage in cracked concrete.
Type GA-ZZ for tensile forces only, also for anchorage in cracked concret
Type GA-ZD for tensile only, for anchorage in uncracked concrete

Scaffold anchors GA-Q/GA-Z

View tables

Technical data
Type / Version	Load stage		3,3 kN (GA-Q)	5,0 kN (GA-ZZ)	5,0kN (GA-ZD)	8,0 kN (GA-Q)
Type / Version	Distance/wall	Cantilever length K	Width W	Length L	Length L	Width W
	50 - 60	155	120	155	265	155
	60 - 70	165	130	165	275	165
	70 - 80	175	136	175	285	175
	80 - 90	185	143	185	295	185
	90 - 100	195	150	195	305	195
	100 - 110	205	156	205	315	205
	110 - 120	215	163	215	325	215
	120 - 130	225	170	225	335	225
	130 - 140	235	177	235	345	235
	140 - 150	245	184	245	355	245
	150 - 160	255	191	255	365	255
	160 - 170	265	198	265	375	265
	170 - 180	275	205	275	385	275
	180 - 190	285	212	285	395	285
	190 - 200	295	219	295	405	295
Required eyebolt			M12	M12	M12	M12
Protective plug			grey Ø 20 mm	grey Ø 20 mm	grey Ø 20 mm	grey Ø 20 mm
Max. size of fastener			up to M12	up to M12	up to M12	up to M12
Shear connector for uncracked concrete > C20/25 (Compression zone)			UPAT UKA3 M10x130		UPAT UKA3 EAP M12	UPAT UKA3 M12x160
Shear connector for cracked concrete > C20/25 (Tension/Compression zone)			Fischer FHB ll-AS M10x60/20	Fischer FHB ll-AS M12x75/25	-	Fischer FHB ll-AS M12x75/25
Walues apply for facing bricks 115 mm thick, load stage = permissible tensile force F I in accordance with DIN 4420, Part 3. Other dimensions on request

Permissible transverse force
Type	Load stage	Permissible transverse force F II
GA-Q	3,3 kN	1,2 kN
GA-ZZ	5,0 kN	0 kN
GA-ZD	5,0 kN	0 kN
GA-Q	8,0 kN	0,9 kN
Transverse force F II in accordance with DIN 4420, Part 3.

Cross-reference for additional information
Subject
Individual evidence of attachment in the anchorage base: Fischer FHB II-AS - For attachment in cracked concrete Hilti HVZ-R - For attachment in cracked concrete Fischer FAZ - For attachment in cracked concrete Hilti HST-R - For attachment in cracked concrete MBA - For attachment to the anchor rail UPAT UKA3 - For attachment in uncracked concrete UPAT UPM 44 - Other attachments
Technical regulation for scaffold anchorage (DIN 4420)
Principles for dimensioning masonry support

Errata and technical changes reserved.

Scaffold anchors GA-Q/GA-Z

Technical drawings

: MOSO scaffold anchor type GA-Q.

: MOSO scaffold anchor type GA-Q, top view.

: Type GA-ZD.

: Type GA-ZD, top view.

: Type GA-ZZ, top view.