For attachment to the anchor rail

Technical Details Fischer FHB II-AS

: Fischer FHB II.

For the fixing in cracked concrete is the FHB II-AS by Fischer perfect.

For the first time is it possible to use the anchor optional for single applications with cartridge or series montage with injection cartridge.

We advise our montage set of cleaning, blow out and set adapter for an optimal inserting of the anchor.

Technical Details Fischer FHB II-AS

View tables

Technical Details
FHB ll M10	FHB ll M12	FHB ll M16	FHB ll M24
Nominal drill diameter d₀ (mm)
10	12	16	25
Depth of drilled hole h₀ (mm)
75	90	110	190
Min. thickness of part h_min (mm)
100	120	150	240
Torque T_inst (Nm)
15	30	50	80

Permissable force Fv for different anchor spacings
component thickness	Type / Version	Load stage	Anchor	ak>	25 cm	50 cm	75 cm	100 cm
component thickness	Type / Version	Load stage	Anchor	ar	FV	FV	FV	FV
150 mm	EK-U/-W-L WK-D/-N/-E FB-U	3,5	FHB ll-AS M10x60/60 A4	100	3,0 kN	3,5 kN	3,5 kN	3,5 kN
	WK-K	3,5	FHB ll-AS M10x60/60 A4	80	3,5 kN	3,5 kN	3,5 kN	3,5 kN
	WK-O	3,5	FHB ll-AS M10x60/20 A4	300	2,7 kN	3,5 kN	3,5 kN	3,5 kN
	WK-Z	3,5	FHB ll-AS M10x60/20 A4	130	3,5 kN	3,5 kN	3,5 kN	3,5 kN
200 mm	WK-K	5,0	FHB ll-AS M10x60/60 A4	100	5,0 kN	5,0 kN	5,0 kN	5,0 kN
	EK-U/-W/-L WK-D/-N/-E FB-U	7,0	FHB ll-AS M12x75/60 A4	140	4,4 kN	7,0 kN	7,0 kN	7,0 kN
	WK-K	7,0	FHB ll-AS M12x75/60 A4	120	7,0 kN	7,0 kN	7,0 kN	7,0 kN
	WK-O	7,0	FHB ll-AS M12x75/25 A4	300	4,3 kN	7,0 kN	7,0 kN	7,0 kN
	WK-Z	7,0	FHB ll-AS M12x75/25 A4	210	7,0 kN	7,0 kN	7,0 kN	7,0 kN
240 mm	EK-U/-L WK-D/-N/-E FB-U	10,5	FHB ll-AS M16x95/60 A4	140	5,7 kN	10,5 kN	10,5 kN	10,5 kN
	WK-O	10,5	FHB ll-AS M16x95/30 A4	300	7,0 kN	10,5 kN	10,5 kN	10,5 kN
	WK-Z	10,5	FHB ll-AS M16x95/30 A4	250	10,5 kN	10,5 kN	10,5 kN	10,5 kN
The values specified in the table apply for anchors with standard dimensions. For a technical application, the attachment values will be recalculated by our engineering office with input of the actual conditions; this may lead to higher load-bearing capacities and other distances from the edge

Errata and technical changes reserved.

Technical Details Fischer FHB II-AS

Installation

The first steps for the montage are

a) Drill hole, b) 2x blowing out, c) 2x cleaning, d) 2x blowing out

with cartridge

with injection cartridge

Inserting of cartridge/mortar

Inserting of the anchor bar at inserting of the cartridge drillhammer necessary

Visual control of the mortar

When set, attach part with torque

Keywords / Related terms: Fischer anchor, stainless steel anchor, anchor system, sleeve anchor, adhesive anchor, cracked tension zone, anchor, heavy-duty anchor, rag bolt, façade anchor