Installation instructions for supporting anchors on anchor rail

Technical Details

Technical Details Installation instructions for supporting anchors on anchor rail

On anchor rail

Pre-assemble supporting anchor with wedge plate, deep-offset washer, HK screw and nut, ...

... Horizontally introduce head of HK screw into anchor rail, turn HK screw with slight pressure until notch at end of screw is perpendicular and tighten nut by hand; ...

: Detail of HK screw when installed.

... Adjust height of supporting anchor by shifting the wedge plate, ...

... adjust pressure screw until it rests securely in place, ...

... Then apply tightening torque in accordance wit for the fasterner or in accordance with type-test, at least as follows:
M 10 = 15 NM
M 12 = 25 NM
M 16 = 60 NM